|
Laatste Nieuws
Monitor Editie 2011-1
|
 |
Insulation monitoring
device with load current and temperature monitoring
for IT systems in medical locations in accordance
with IEC 60364-7-710: 2002-11, sub-clause
710.413.1.5 “Medical IT system”.
|
|
Binnenkort
ISO-MED427P
Binnenkort |
 |
The A-ISOMETER® isoMED427P monitors the insulation
resistance RF in medical IT
systems of AC 70...264 V. In addition, the IT system
transformer's load current and temperature
are monitored. Once an
insulation fault is detected, the internal locating
current injector allows
insulation faults to be localised.
Alarms and measured values are made available to
other bus devices
via the BMS interface.
|
|
STW2 Measering current tranformer |
 |
Measuring current
tranformers STW2 are preferably used for the
monitoring of power supply in medically used areas.
|
 |
The universal remote
alarm indicator and test combination MK2430
duplicates operating messages and alarms of Bender
EDS, RCMS und MEDICS systems. In MEDICS monitoring
systems the MK2430 complies with the requirements of
IEC 60364-7-710:2002-11
|
|
TM alarm indicator and operator
panels |
 |
The flexible TM panels
provide the user with a solution that suits the
requirements of modern healthcare facilities and
other buildings. Free configurable text messages and
additonal text display provide exactly that
information the medical and technical staff needs in
the particular situation. |
 |
The factory-assembled
modules of the UMC series are intended to switchover
(t < 0.5 s) between two power sources (AV / SV
respectively SV / ZSV) and to monitor IT systems in
medical locations. Display and alarm indication at
the alarm indicator and operator panels takes place
via bus technology. The module can be used for all
common rack systems (the rack systems have to be
provided by the customer). |
 |
Hier komt de tekst in
te staan. The transformers of the DS0107 series
have reinforced isolation and are designed for
medical IT systems according to IEC 60364-7-710:
2002-11; DIN VDE 0100-710 (VDE 0100 Teil 710):
2002-11 and DIN EN 60742 (VDE 0551): 1995. The
windings are galvanically isolated.
|
 |
The transformers of the
ES710 series are designed for medical IT systems in
medically used rooms according to IEC
60364-7-710:2002-11 and DIN VDE 0100-710
(VDE0100 Teil 710):
2002-11. The windings are galvanically isolated.
|
© Bender benelux bv
|
|
