|
Laatste Nieuws
Monitor Editie 2011-1
|
 |
The AGH150W-4 coupling
device is designed to extend the nominal voltage
range of the
A-ISOMETERS®
IRDH265-4/IRDH365-4/IRDH-1065B-4 to DC 0 … 1760 V. |
 |
The AGH204S-4 coupling
device is designed to extend the nominal voltage
range of the
A-ISOMETERS® described in the wiring diagram
below to AC, 3/N AC 50 … 400 Hz,
0 … 1650 / AC/DC 0 …
1300 V.
|
 |
The AGH520S coupling
device is designed to extend the nominal voltage
range of the
A-ISOMETERS® described in the wiring diagram
below to (3/N) AC 50 … 400 Hz,
0 … 7200 V.
|
 |
The RK170 measuring
transducer is intended to convert current signals
(0…400µA) of measuring instruments of A-ISOMETERs®
and residual current monitors (RCM, RMCA) into
standardized current signals 0(4)…20 mA (0…10 V).
These currents are usually required in process
technology.
|
 |
The SMI472-12 converter
module is intended to convert digital signals (alarm
and status messages) into serial information for the
BMS bus. 12 digital inputs are provided which can be
grouped into alarm and operating messages. By
default, 8 inputs for alarm messages and 4 inputs
for operating messages are provided.
|
|
Mounting frames for X420, X440,
X460 and X490 enclosures |
 |
For mounting
X420, X440, X460 X470 and X490 enclosures into
panels.
Suitable for IR420, IR425, GM420, VME420, VMD420,
RCM(A)420, EDS460, RCMS460, RCM470, EDS490, RCMS490
and more.
|
|
Measuring instrument 9604 / 7204 |
 |
The analog measuring
instruments of the 9604/7204 series are designed for
indication of measuring values provided by BENDER
devices equipped with the appropriate output. These
are for example
A-ISOMETERS® and residual
current monitors RCM/RCMA.
|
|
Measuring instrument 9620 |
 |
The analog measuring
instruments of the 9620 series are designed for
indication of measuring values provided by BENDER
devices equipped with the appropriate
output 0 to 20
mA.These are for example A-ISOMETERS®.
|
© Bender benelux bv
|
|
